You are currently viewing Average Prices For A Garage Door Repair?

Average Prices For A Garage Door Repair?

Sharing is caring!

When your garage door begins acting up, the first thing on your mind is probably how much it’s going to cost for a garage door repair. This can be a huge issue for homeowners who might not know exactly what needs repairing, and more than likely, they’ll want an estimate, so they have enough funds before work begins!

Table of Contents

What Is The Average Cost For A Garage Door Repair?

Depending on the size and type of garage door, labor can cost anywhere from $75 to $200 per hour. Parts will typically run between $100 and $500, but it’s not unheard of for them to cost more than $1,000.

Many homeowners choose to do repairs themselves to save money, but if you’re not familiar with how garage doors work or don’t have the necessary tools, it’s best to leave the job to a professional. Trying to fix something yourself that you’re unfamiliar with can often lead to further damage and even injuries.

Frankly, a hospital bill from a DIY injury will cost more than hiring a professional to tackle the job. 

Garage door repair costs

How Much Does it Cost to Replace a Garage Door?

Depending on the type of door you choose and the installation, it can cost anywhere from $500 to $4,000 to replace a garage door. You can also expect to pay an additional $100-$200 for installation.

A metal garage door will be more expensive to replace than if it’s made of wood or plastic. A damaged garage door, or one that needs repairs, will also increase the cost of replacement.

If you’re considering replacing your garage door, it would be wise to shop around and compare prices before deciding. Be sure to ask about warranties and installation fees as well.

Average Costs For Small Garage Door Repairs

The cost of any garage door repair can vary depending on the make and model, and for accurate pricing, we advise you to contact a local repair service. The garage door is your home’s largest entry and exit point, making it essential to keep its condition as good as possible.  

Here are a few average price points you may incur for more minor repairs on your garage door.

Garage Sensors:

The alignment of your sensors can affect the proximity detection and closing ability of a door. If you’re noticing that it’s taking an unusual amount of time for doors to close, or they always seem like they miss their target by just enough so as not to make contact with anything at all, then this may be what’s going wrong! 

The average repair cost ranges from $50-$75. Unless someone has experience realigning these delicate devices themselves, in which the repair could be free! However, it could take more than one try of realignment before getting perfect results.

Garage Door Tracks:

While the cost of repairing a bent or dented track can vary depending on where it is located, an average repair estimate ranges from $125-$150. If some damage has impacted your railway, this could explain why your cars don’t always pass through smoothly at specific points along their length. Contractors will have the tools necessary to get those tracks smooth again in a short amount of time!

Roller and Hinges:

The roller and hinges combination can be expensive to fix. You’ll spend between $10-$15 on each broken/damaged roller, while the price for just one hinge will be about $10 dollars each.

One garage door could have 10-12 rollers and at least 15 hinges, so a professional repair on this could add up quickly between product costs and labor.

Garage Door Spring Repair:

You can tell if something isn’t quite right with one when they start popping or clicking more than usual while opening/closing the door manually; this may be an indication the springs need to be fixed, which would cost between $200-$300, depending on how many pieces need attention (A set of 2 springs will set you back about $300).

Garage Door Broken Cables:

It can be a hassle to fix when your garage door cable is broken. A professional will need about $150-$200 for new parts and time from their busy schedule to replace this essential piece of equipment that holds up all of our homes!

Broken Glass Panel:

When you have a broken glass panel, it’s important to fix the issue as soon as possible. The cost of fixing this type of damage can range anywhere from $75-$100 or potentially less if some minor repairs are done.

Noisy Garage Door Upon Opening and Closing:

If you notice any grinding or squealing when opening/closing the device, please lubricate all gears with oil before trying again; if this does not solve the problem, see a professional for assistance!

How Much Does It Cost To Replace A Pulley On A Garage Door?

Depending on the type of pulley, it can range from $10 to $40. Garage door pulleys are usually a simple screw-on design, so they’re easy and inexpensive to replace. If you have a garage door opener, you may be able to get away with just replacing the belt rather than the entire pulley system.

However, depending on the size and type of pulley, be aware that it could cost anywhere from $50 to $200 to replace a pulley on a garage door. 

It’s important to note that garage door pulleys are not typically considered a “repairable” part. In other words, most people will simply replace the entire pulley unit rather than try to fix it. There are loads of different types and sizes of pulleys, so it can be challenging to find the exact replacement part you would need.

If you’re comfortable doing some basic DIY repairs, however, you may be able to save some money by replacing only the worn-out or broken parts of the pulley unit.

How To Fix A Bent Garage Door?

You can fix a bent garage door by using a pry bar to straighten it out.

If the door is severely bent, you may need to remove the track and remove the screws that hold the door in place. Once you have straightened it out, reattach the track and screws. If the door is still not aligned correctly, you may need to adjust the hinges.

This is a somewhat complicated process, and you might make it worse by trying to fix it. Unless you’ve successfully set a bent garage door yourself before, we definitely suggest getting a professional to fix this problem.

What Do You Do When Your Garage Door Won't Close?

If your garage door isn’t closing, it could be for various reasons. Here are troubleshooting tips to help you identify the issue and fix it:

  • Check the transmitter battery to make sure it’s charged.
  • Make sure the wires aren’t loose where they connect to the opener. 
  • If the opener is old, it might need to be replaced. 
  • Make certain the photo eye sensors are clean and in working order. 
  • Check that the tracks of the garage door are clean and free of debris.
  • Make sure the brackets at either end of the tracks are securely fastened.
  • Confirm there is no obstruction blocking the path of the door. (e.g., a stray basketball)

If you’ve checked and troubleshot all of these things and your garage door still won’t close, you probably have something wrong with the door itself, and you’ll need to repair it.

In Conclusion

The garage door is the first point of contact for your home. As such, it’s imperative that you take care to ensure its safe and reliable use by making sure all aspects are functioning properly at any given time.

Since garage door repair isn’t always as simple as 1, 2, and 3, don’t hesitate to get estimates and an inspection from a professional instead of doing things yourself with the wrong tools (and possibly getting hurt). You’ll be glad you did!

Sharing is caring!

Rebecca

Die-hard DIYer, home enthusiast and sometimes I cook :-)

This Post Has 2 Comments

  1. Best Access Doors

    This is an excellent post! I’m looking forward to reading your future post. You did a good job. Thanks for sharing some tips about garage door repair!

Leave a Reply